Error 4

Water System Tips

Make sure that the Water System is at least 10cm away from the wall. If less than 10cm, pull machine further away to leave a minimum 10 cm gap.

    Check under your Water System. Is there something that may be blocking the vents underneath? (Such as a cloth or towel under the machine)

    If Yes:

  1. 1

    The Water System has vents underneath, if those are blocked the Water System will not refrigerate.

  2. 2

    Remove the towel (or item blocking vents) and reset:
    Unplug the Water System from the power supply for 20 seconds then plug it back in.

  3. 3

    Wait a minute for the system to start working.

  4. 4

    Wait for the cooling operation to complete (approximately 30 minutes to fully chill).

  5. If No:

    Reset your Water System by following these steps:

  6. 1

    Unplug the Water System from the power supply for 20 seconds then plug it back in.

  7. 2

    Wait a minute for the system to start working.

  8. 3

    Wait for the cooling operation to complete (approximately 30 minutes to fully chill).

Related Content

Videos

Descaling & Changing Water Filter

Videos

Changing the UV Lamp on your T6

Guides & Manuals

Work Water System T6 Care Guide Manual

Can't find what you're looking for?

Chat with Us

Monday - Friday

9:00 AM - 5:30 PM

Saturday - Sunday

10:00 AM - 7:00 PM